You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.




Sunday, April 28th 2013, 12:46pm

Does any one make a 1/2 inch riser to single or double 1/8 inch tubing adapter

Our existing watering system has two 1 inch pipes that circumnavigate the house, and go to all the planter boxes. Currently there are 1/2 inch risers approximately every 6 feet. If possible, I would like to convert the system to a drip system. Each riser only needs one or two 1/8 inch tubes to service the plants associated with it.

I've found several 1/2 riser to multiple (4, 8, or more?) 1/8 inch tubes. But I only need one or two...

So, does anyone make 1/2 inch riser to single or double 1/8 inch drip tubing.


Supreme Member

Posts: 5,331

Location: Metro NYC


Sunday, April 28th 2013, 12:54pm

Look for multiple-outlet adapters that you can customize for the number of open outlets.



Posts: 2,397

Location: USA


Monday, April 29th 2013, 1:12am

I use these all the time. They work great for pots or what have you. I hate the mutiple outlet adapters. If mutiple outlets are needed I insist on installing a 1/2 inch dripline with 1/4 tubing for the emitters or I wont do the job.
Dig Adapter
You'll need 1/2" threaded caps for the top of these.

Rate this thread