You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

juanybm

Starting Member

1

Wednesday, September 26th 2012, 11:44am

anti-drain valves

I would appreciate some help understanding how anti-drain valves work. I have a wastewater aerobic system with spray irrigation. The starting operating pressure is 30psi and the total pressure required for the pump is 35.6psi. The lot downslopes away from the pump approx 8ft below pump-off switch. I want to control low-head drainage but the specs of the valve I'm considering have a preset pressure of 5psi (12ft of head) and can be adjusted to 14psi (32 ft of head). This valve will be installed on the pipe under the sprinkler head. Will this valve work?

?( :?: :S

Wet_Boots

Supreme Member

Posts: 4,082

Location: Metro NYC

2

Wednesday, September 26th 2012, 1:52pm

Under-head anti-drain valves will subtract pressure from the sprinkler head, according to their setting.

Rate this thread