You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

jmorrise2

Starting Member

1

Wednesday, August 1st 2012, 6:08pm

irritrol r series 12 station controller

the above controller irritrol r series 12 station.



says all 8 stations are shorted even after i detach all wires



how i check for short in circuits with ohmeter?



is the controller probably bad?



also all the sprinkler solenoids have a 4 inch plastic nipple looking device wires in series to each one



what are these?



thanks

This post has been edited 1 times, last edit by "jmorrise2" (Aug 1st 2012, 6:25pm)


Wet_Boots

Supreme Member

Posts: 4,080

Location: Metro NYC

2

Friday, August 3rd 2012, 5:53am

If no valve wires are connected to a controller, and the controller displays a short-circuit message, you have to suspect the controller is faulty. Just the same, unplug it, and remove the backup battery, and let it be for a few hours. Then try to get it going again.

Rate this thread