You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

LordD

Starting Member

1

Sunday, April 8th 2012, 2:16pm

Toro Precision Chip Sprinklers and Design Question

Using Schedule 40, Source is 40PSI I am using...

[align=-webkit-auto]15-H 90, 15' X 2 = 0.58 X 2 = 1.16GPM
10-F 360 10' X 1 = 1.04 X 1 = 1.04 GPM
10-H 180 10' x 1 = 0.52 X 1 = 0.52 GPM
15-H 180 15' x 2 = 1.17 x 2 = 2.34GPM
TOTAL 6.06GPM
[/align]



Total 6 Sprinklers

This circuit which is L shaped, on the bottom leg of the L, I wish to place the 1 10' 360 degree Toro Precision sprinkler listed above, on the Supply Pipe.

The design shapes I have seen show that you ought not to put sprinklers on supply llines.

Granted this is only 1 Sprinkler right on the Supply line, Max Supply for Schedule 40 is 8GPM.

Will this not work at all? What do you think? This is just a residential front lawn.

wsommariva

Supreme Member

Posts: 327

Location: Northern New Jersey

2

Monday, April 9th 2012, 7:56am

What do you mean by supply line? All heads need to be installed after a valve, no?

3

Monday, April 9th 2012, 8:09am

I'm a little confused my self.
Anything downstream of the control valve should be fair game.
Rough piping terminology : main to zone valves, lateral after valves.
So you would still be on a lateral, correct?

Rate this thread