You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

carverrocksred

Starting Member

1

Monday, July 4th 2011, 3:47pm

Hunter Pro-C Err

Our Hunter Pro-C system was running fine for weeks and one day it didn't run at it's normal program. I went to check the controller and it read, "5 Err". Tried running single stations manually and each station came back with "1 Err", "2 Err", etc. Called Hunter...they thought it was the cellinoid. So I bypassed zone 5's cellinoid and no luck. Called the people who installed our system and a guy came out and didn't have a clue either. Anyone experienced this error message?

Mitchgo

Supreme Member

Posts: 499

Location: Seattle

2

Monday, July 4th 2011, 6:01pm

Reset the controller

Ohm resistance to each valve and voltage readings need to be taken from a multimeter to be able to diagnose the issue

servicetechMA

Advanced Member

3

Friday, July 8th 2011, 7:13pm

pro c

try holding down the prg - and right arrow,then hit reset on back of faceplate,continue holding the three buttons until 12 am is displayed on screen. this might fix it,this periodically happens. not saying this will fix it,but it could,if it doesnt you need to get a competent service tech out there lol, but not before you do what mitchgo says,that needs to be done to find the problem. do any zones work manually from clock.

Rate this thread