You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Austin_Walker

Unregistered

1

Friday, June 24th 2011, 11:51pm

Solenoid mystery

Hi Y'all,

My zone 1 stopped working about 2 weeks ago. I have an older house so I assumed that the valve / solenoid had gone bad. I measured 28 V at the valve when I'd unplugged (and turned off) everything. I went ahead and changed the diaphragm and the solenoid (I bought a new valve and replaced the entire top section).

The valve did not turn after this. In fact, I didn't hear any noise at all when the solenoid is powered / unpowered. So I disconnected the solenoid - and interestingly, I discovered that I get 24 V when I disconnect the line from the solenoid, but barely 0.5V when the solenoid is still connected. I understand the solenoid draws current, but did not expect such a large voltage drop. When I test the (new) solenoid with an ohm-meter, I get 30 ohms of impedance, which I understand is the normal reading.

Does this situation make sense? After all this testing, I am at a loss to explain what I am seeing. I deeply appreciate your help,

Regards

Walker

Wet_Boots

Supreme Member

Posts: 4,080

Location: Metro NYC

2

Saturday, June 25th 2011, 10:00am

Now test your zone wiring for resistance - I believe your problem is there. A 'good' voltage reading doesn't always give you an accurate picture.

Rate this thread