You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Yongkee Cho

Unregistered

1

Thursday, March 31st 2011, 9:15am

Need some comments...

I bought a FEBCO 825y for installing my new sprinkler system. I was going to install it by replacing the existing faucet. Copper pipes, fittings, torches and solder are ready. I met a problem here: the faucet is too close to the plastic siding. I am afraid that siding will be melt when I torch the joint.
[img]http://farm2.static.flickr.com/1178/553231679_060f90eadd.jpg?v=0[/img]
I found many neighbours has a separate sprinkler outlet next to the yard faucet. I know it is better to split a new extention for sprinkler, but I doubt I can do it myself.
My question is if there is a way to safely remove the faucet. If I let a plumber install the back flow preventer, what would be the reasonable quote for the job? Again, I prepared everything.
Thank you very much.
Yong

Mitchgo

Supreme Member

Posts: 502

Location: Seattle

2

Thursday, March 31st 2011, 8:27pm

Faucets are generally only 1/2" supply which is 2-3 heads per zone tops.. Is this what you are doing?
You may have a 3/4" hose bib, but odd's are the supply to the hose bib is only 1/2".

Tap in at the main supply from where you service line enters your house which is generally 1" pipe with a 3/4" or 5/8" Meter you can get much more flow which in turn is less valves, wiring and pipe. Money saved

With that being said, in the picture it appears to have copper coming out of the house and then the hose bib is threaded on ( I can't tell from the picture if this is a frost proof hose bib , the ones that the shut off is 6-12" inside the house)
If that's the case- Thread off the hosebib using 2 pipe wrenches ( the second for counter force) Install a brass Tee and then branch out from there with your fittings.

Wet_Boots

Supreme Member

Posts: 4,028

Location: Metro NYC

3

Friday, April 1st 2011, 11:17am

If you can't do the indoor plumbing to make a new connection, hire a plumber, and get it done right.

Similar threads

Rate this thread