You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

kevinc

Starting Member

1

Sunday, May 16th 2010, 12:25pm

Can expansion modules go bad?

I purchased a home with a Hunter Pro-C controller which has never been wired up, dated 2005. I wired the controller and the first 3 zones work fine. Zones 4-6 do not work. If I switch the valve wires to zones 1-3 they work ok, indicating to me that the expansion module is not functioning. It also gets warm to the touch a few minutes after turning the controller on. Since this is the first time it has been used and is 5 years old, is it possible the expansion module is defective? It is the grey version. Will the new black version work ok with this controller? Is there anything else I can do before ordering a replacement. Thanks

Wet_Boots

Supreme Member

Posts: 4,044

Location: Metro NYC

2

Sunday, May 16th 2010, 4:13pm

anything can go bad. Try a controller reboot. And yes, the newer expansion modules fit in the older Pro-C

Rate this thread