You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

SSoens

Unregistered

1

Tuesday, July 29th 2008, 4:25pm

Sprinkler head not rotating

I have Nelson 6000 heads. One particular head was not rotating. I replaced it with a brand new head, but the water stream still will not rotate. Where can I go for troubleshooting help?

hi.todd

Supreme Member

Posts: 413

Location: Houston, Texas

2

Wednesday, July 30th 2008, 8:59pm

It sounds like a pressure problem at the head. there maybe a hunk of dirt that got in to the sprinkler head while you were replacing the head. You should take off the rotor look into the bottom of it wash it off and clean it as best you can. turn on the zone let the water gush out of the open hole for a few seconds. When you get back to the hole try not to let dirt get into the system and put the head back on. If the water does not have pressure coming out of the hole in a strong way then you may have dirt clogging the system at a funny pipe 90 or fitting.
Good Luck :thumbsup:

If you are still having problems after this point you may need to replace the head with a Hunter PGP or Rainbird 5000. Dan
:thumbup: :thumbsup:

Rate this thread