You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.




Saturday, June 14th 2008, 6:12pm

using teflon tape on manifold

I purchase a manifold with 3 valves. There was no teflon tape where the valve screws onto the manifold. Do i need to take it apart and put tape on the valve. Thanks rick


Supreme Member

Posts: 5,288

Location: Metro NYC


Sunday, June 15th 2008, 8:57am

Got a picture? A few select manifolds used O-rings for sealing, against male-threaded valves.


Thursday, June 19th 2008, 4:04pm

Dura Cooperation has a Dura manifold that is designed with O-Rings that allows you to hand tighten them on to the valve without any leakage or teflon tape.

If by chance you have used a tool that has tighten down to tight it has a chance to compromise the features of the manifold system.

As Shown in this Picture:

Professionals that provide the solutions.

Come home to our Web Site

Rate this thread