You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.


Supreme Member

Posts: 5,201

Location: Metro NYC


Saturday, June 7th 2008, 7:23pm


But, on a well, you have an opportunity to adjust the pressure switch, for a higher operating pressure. Do a flow test at 60 or 70 psi, if you want to work with I-20 heads.
This may not be true! Are you talking about a submersible well pump? That is what I have most experience with.

I say design for 12-14 gpm and everything will be fine based on your preliminary tests.
If the supply is a well, with a submersible pump, then the well's pressure switch can often need adjusting, if the sprinkler system is to have useful pressure, about 50 psi at the heads. One can certainly work with less than 50 psi head pressure, but when a DIY-er uses the phrase "about 30 psi", this is too close to marginal.

Do note that one should add some air to a pressure tank, when raising the pressure switch settings, although a 10 psi increase (without adding air) hasn't proven fatal, in my experience. If the well can deliver water at 60 psi, without cycling, then you can take a new flow measurement, and use that number to design with.

Similar threads

Rate this thread