You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

pete_massa

Starting Member

1

Monday, August 13th 2018, 9:05am

Toro TMC 212 Controller Mv error message

I have a Toro TMC 212 controller with an Irritroll rain sensor. I am getting a flashing message "Mv" on the controller screen which is preventing the sprinklers to come on. In manual mode, I can get them to work after a few tries. It has been sporadic but is happening more often lately.

Not sure if this is a controller issue or the master valve. Where do I start?

2

Monday, August 13th 2018, 12:02pm

Years ago when we used those controllers at a company I worked for, we had that issue often. But ONLY for a pump start relay or older master valve. The TMC 212 had issues providing enough juice to the valve (I.e. Zone #1) AND the PSR or MV. Do you have either on your system?

Rate this thread