You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Sunday, July 15th 2018, 8:07am

Do in need to replace my Febco 765

I bought a house with a irrigation system which was completely destroyed by way of not being winterized for few years along with damage from needed excavation work. One of the few remaining useful items is a Febco 765-1 PVB. I'm estimating that it sits about 4' lower than my highest sprinkler head in the back yard. Do I have to bite the bullet and replace it with a Reduced Pressure Backflow Preventer?

Right now the PVB is outside. If I go with a R.P. unit, should I install it indoors to protect it from the winter?

Wet_Boots

Supreme Member

Posts: 5,256

Location: Metro NYC

2

Sunday, July 15th 2018, 7:18pm

You could always raise the PVB five feet higher, and gain the elevation it requires. :thumbsup:

3

Tuesday, July 17th 2018, 8:23pm

You could always raise the PVB five feet higher, and gain the elevation it requires. :thumbsup:
Thanks wet boots for the reply. Problem is that the pvb is on the front of the house. To raise it up that high, it would be above any shrubs. To add to that, i have decided to go with a fertigatioan system, which I think pushes me towards a rpz.
From reading your past posts, I know you're not a fan of indoor rpz's. Though not ideal, I was thinking of mounting the rpz indoors in the basement, to protect it from freezing. If I left the PVB outside, and had the rpz before it in the basement, would that cut down on water spitting out of the rpz?

Similar threads

Rate this thread