You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.


New Member


Friday, June 8th 2018, 10:57am

One zone low flow

I have a culinary water system. I have one zone that is very low pressure but all my other zones have great pressure. I have replaced the valve a checked for blockage in the line. I have ran the system for several hours and have not noticed any bubbles or soft parts where my line “should run.” I say should because I am not sure exactly where the lines were ran, my system was installed by the builder and I did not get the plans. I am hoping for suggestions to finding a leak or or any other problems I might be missing. I have also checked the control valve and it is fully open. I have replaced the Silanoid, valve and diaphragm and still have the same low flow problem.


Supreme Member

Posts: 5,326

Location: Metro NYC


Saturday, June 9th 2018, 7:08am

"culinary" water system ?? ?(

Rate this thread