You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

tiocareca

Active Member

Posts: 6

Location: USA

1

Wednesday, September 20th 2006, 10:33am

pump control switch

I installed my system; however, the well pump turns off/on as the pressure drops. Is there a switch that will control the well pump so it will continually run as the irrigation system runs? I have been told it is better a well pump to run continually vs. off/on.

Thanks for the help.

Tio

Wet_Boots

Supreme Member

Posts: 4,073

Location: Metro NYC

2

Wednesday, September 20th 2006, 11:55am

First thing you do, is try to adjust the pressure switch to get constant running, and/or change nozzles in the rotor heads to bring system consumption in line with well performance. Change the pressure range to, say 46-65 or 50-70 psi, at the most, because the other components may not be rated for pressures above 75 psi.

Do these things first. It is almost always possible to bring a system and well into a state of cooperation.

tiocareca

Active Member

Posts: 6

Location: USA

3

Wednesday, September 20th 2006, 3:52pm

wet boots...thx...i will try this within the next week and give you an update...not much need right now for the sprinkler system in Chicago area right now...enough rain...but will adjust and do it manually.

Rate this thread