You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.


New Member


Sunday, October 22nd 2017, 9:36pm

Toro T5 Rapid Set reducing right Arc stop problem

Using the Rapid set feature to reduce the left arc stop ok. This is well documented in the Toro documentation and videos. I can't find it documented if Rapid set can be used to reduce the right arc stop. Tried the opposite instructions as given to reduce the left stop, but no success. Is it possible to use the Rapid set feature to reduce the right arc stop on the Toro T5?




Posts: 2,399

Location: USA


Monday, October 23rd 2017, 2:53am

I've never had the pleasure of adjusting the Toro Rapid Set.
Check out this video
If the right stop is broken, I'd just turn the sprinkler to the right until the right hand side is set correctly then set the left stop.
If it doesn't stay set after that then the sprinkler needs replacing.


New Member


Tuesday, October 24th 2017, 8:37pm

Thanks for the feedback. I was hoping the channel locks weren't needed but rotating the head manually was plan B. :thumbup:




Sunday, June 3rd 2018, 10:43am

Moving right stop counterclockwise on Toro T5 Rapidset

I had the same problem. What worked for me was to move the right stop clockwise all the way around to where I wanted it. For example, to move the right stop counterclockwise by 30°, I moved the right stop clockwise by 330°. Good luck.

Rate this thread