You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

larry benoit

New Member

Posts: 3

Location: USA


Thursday, July 6th 2006, 8:30am

hunter pro-c programming

I just installed a 9 zone pro-c controller. The controller will not allow me to program anything above zone 4. It gets to zone 4,when I set the duration and try to advance to zone 5 it goes back to zone 1.
Am I doing something wrong or do I have a defective controller?


Supreme Member


Thursday, July 6th 2006, 9:08am

you can't hot swap modules as far as i know....

disconnect battery and power to timer...remove install and then turn on power...maybe that will work???

also try

Sprinkler Solutions, Inc.
Arizona and Colorado



Posts: 2,361

Location: USA


Sunday, August 6th 2006, 12:30pm

Hi Larry. What you have done is a common occurance. I see it all the time. I maybe wrong but I believe you're programming the start times and not the zone run times. The Hunter Pro C has 4 start times. You only need one start time to run all the zones. You don't need a start time for each individual valve. Just tell it what time you want it to come on and they'll automatically run in sequence. Of course you have to program each individual valve for how long you want it to run for.
If I can't fix it, it's broken!

Rate this thread