You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

cwithington

Unregistered

1

Thursday, June 30th 2016, 5:13pm

Backflow Preventer Spewing Water

I have two zones in my irrigation system where when the system runs, the backflow preventer will spew water out from below the bonnet, I have 4 irrigation heads on the zone. I have replaced the guts in the febco 765 backflow preventer and yet it seems to do it only on two of the zones as its running. I have 10 zones and it only seems to do it on those two. Is it a case of lack of water for those 4 heads or am I getting too much water and need to adjust the flowrate on those heads? Please advise if you can, thank you!

SunCoLawns

Advanced Member

Posts: 111

Location: Omaha, Nebraska, USA

2

Thursday, June 30th 2016, 5:36pm

It sounds like those zones are using too much water to allow the backflow sufficient pressure to stay seated. Either increase the water or decrease the amount of water those zones are demanding.

cwithington

Unregistered

3

Friday, July 1st 2016, 6:09pm

Backflow

Thank you

rlagm3

New Member

4

Thursday, March 16th 2017, 7:22am

RE: Backflow

did this help? i am having a similar problem
Thank you

Similar threads

Rate this thread