You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Gambeanie

Starting Member

1

Saturday, May 28th 2016, 10:43am

Only half of a zone is working

I am a homeowner with a 15 zone six heads per zone homeowner with an odd issue. I have one zone that recently stopped working on 3 of the 6 sprinkler heads. I don't see any evidence of breaks in the lines and even when I manually activate the valve there is no change. All other zones work properly. Any ideas? :)

hi.todd

Supreme Member

Posts: 482

Location: Houston, Texas

2

Saturday, May 28th 2016, 11:34am

I think I have seen this before

I think I know what this is.
Either at the irrigation controller or in the field, There are two independent valves that are wired together. So, When the timer activates the designated zone valve at the controller, actually 2 solenoids are activating.

Either you have a electrical issue wiring or Solenoid on 1 of the 2 zones that are wired together. Or, a problem with the diaphragm on 1 of the 2 zones wired together.

Good Luck

:thumbsup:
:thumbup: :thumbsup:
LI0006121, BPAT0011021, CI0009500

Rate this thread