You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Casomatic1

Starting Member

1

Saturday, May 21st 2016, 7:38pm

weak water pressure at the end of the line

I have 4 zones in my sprinkler system. The last two sprinklers in one zone have nearly no water pressure. These sprinklers are the furthest from the pump out of all the sprinklers. I took al the sprinklers off in the zone and turned the system on hoping to flush anything out. There are 8 sprinklers in this zone. No elevation change. The water is rusty. Someone drove over the 1st sprinkler and cracked the pipe where it attaches to the elbow for the nipple. . I cut behind the crack and set a new elbow.Also the controller leaks water out of holes on the underside between the chamber.It leaks at a rate of about 4 gallons an hour. I
I just gave as much info as I can. The controller is at least 15 years old. I am neevous that I wont replace it with the right one.

Wet_Boots

Supreme Member

Posts: 5,136

Location: Metro NYC

2

Sunday, May 22nd 2016, 8:38am

You might considering sharing the make and model number of the controller.

Rate this thread