You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Xfarmer70

Starting Member

1

Thursday, February 4th 2016, 10:46am

Valves and lake water.

I have been irrigating my lawn with lake water for a couple of years. I just ran a main line and used effluent sprinklers to see how it works. Works well so I'm putting in valves, controller and wire. Is there one valve better than others for lake water? Pretty clean lake but at times get a little algae or sand. Thanks

Wet_Boots

Supreme Member

Posts: 5,277

Location: Metro NYC

2

Thursday, February 4th 2016, 11:07am

You might consider going "all out" and skipping standard irrigation diaphragm valves in favor of motorized ball valves, if your sprinklers can run on effluent water.

The best irrigation valve for water with algae will be the Rainbird PESB "scrubber" valves which are quite expensive, as might be any top-of-the-line product.

Another approach to pond water supplies is to strain and filter the water before it can enter the system, which has the advantage of letting you use standard valves and heads, but algae buildup on filter screens would have to be dealt with.

This post has been edited 1 times, last edit by "Wet_Boots" (Feb 4th 2016, 11:24am)


Rate this thread