You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

concreteguy

Starting Member

1

Thursday, October 8th 2015, 3:26pm

Leaking

Hello guys. I live in Texas and have a Wilkins 420. Where it comes out of the ground and back into the ground there are some type of fitting with a small hole in it. I noticed it was leaking the other day so I turned off the water and removed the insulation. Turned water in and no leaks. Ran a test zone and turned it off and water was squirting out of both holes in the small fittings at the bottom. I know nothing about these so any help would be appreciated.

Evergreen Sprinkler

Active Member

Posts: 29

Location: Boise, Idaho

2

Thursday, October 15th 2015, 1:04pm

That could be the 1/4" test cock... look for a flat head screw slot and turn it to close the valve.

Rate this thread