You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Saturday, January 14th 2006, 9:54am

Lost water pressure

Our sprinkler system uses lake for it's water supply. The lake has gone down so far that we have extended our suction pipe over 100 ft. to reach the water. Is this the reason we've lost pressure to our sprinker heads? We were able to run 6-7 heads at a time, now we are only able to run (3) heads at a time. Thanks for your input.

drpete3

Supreme Member

Posts: 376

Location: USA

2

Monday, January 16th 2006, 5:19am

could be. Does the intake have a filter? What size pipe is your intake?
Thanks,

Pete

Wet_Boots

Supreme Member

Posts: 3,878

Location: Metro NYC

3

Monday, January 16th 2006, 8:51am

Friction losses in a suction pipe will greatly reduce pump output. You need to compare the original suction line to the longer line, using a friction loss table. If the original suction line was, say, twenty feet long, and an inch-and-a-quarter in diameter, the newer hundred-and-twenty-foot suction line would probably need to be a two-inch diameter pipe, to give you equivalent performance. If you can switch the nozzles in the sprinkler heads, you might regain the original coverage. You'll have to run the system longer, but if you have the time, the lawn won't know the difference.

4

Thursday, January 19th 2006, 4:23am

The complete system is 2" pvc and a filter is installed. Thank you for you response to my question.

Rate this thread