You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

mrbill

New Member

1

Monday, October 17th 2005, 9:05am

Which filter screen?

I have a water well for lawn irrigation and need to replace my sand separator. The well pumps about 25gpm and the pressure is between 35-65psi. The Vu-Flow T Style Screen Filter is what is recommended, 1 1/2 inch with 100 screen. However, there is the poly and stainless steel screens. Which should I go with and what are the life expectancy of each. And why should I go with your suggestion?

Thanks for your help.

Bill

Wet_Boots

Supreme Member

Posts: 4,078

Location: Metro NYC

2

Monday, October 17th 2005, 2:27pm

Stainless will clean up easier. Less worry about tearing the nylon screen.

mrbill

New Member

3

Wednesday, October 19th 2005, 3:03am

Thanks for the input.
I was also referred to the stainless and was recommended to have a spare cartidge on hand. When the cartridge needs cleaning, best to simply swap out the cartridge with the spare, get the water back on and clean the cartidge at my leasure. Cleanup can be easier when the cartridge is dry.

MrBill

Rate this thread