You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

nike10

New Member

1

Sunday, February 15th 2015, 7:49pm

Low Pressure On One Zone

Have a 6 zone system with Rainbird valves. Currently have one zone that has low pressure. I have already replaced the bladder in the valve and ohm tested the solenoid. The solenoid tested at 40 ohms. I'm guessing my next step would be checking for a leak on this zone, would that be correct.

irrigirl

Active Member

2

Monday, February 16th 2015, 8:22am

How old is the valve? Is the flow control open, if there is one?

nike10

New Member

3

Monday, February 16th 2015, 9:02pm

Not sure of the age of the valve, and it does not have flow control.

irrigirl

Active Member

4

Tuesday, February 17th 2015, 8:18am

Okay, does it have low pressure when activated by the timer and when you activate it manually at the valve? Or just when by the timer?

nike10

New Member

5

Tuesday, February 17th 2015, 3:28pm

Low pressure when activated manually and by the timer.

Wet_Boots

Supreme Member

Posts: 5,287

Location: Metro NYC

6

Wednesday, February 18th 2015, 9:36am

Look for a break in the zone. Puddles of water. Soft ground.

nike10

New Member

7

Wednesday, February 18th 2015, 9:18pm

Well today I walk on the side of the house to where the valve box is and the valve box is half full of water and the ground in front of it is real soggy. Will dig it up tomorrow

Rate this thread