You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.




Friday, April 18th 2014, 3:32am

Hunter node 400 question

Hallo there! I would like your help in a technical issue.
I have bought the hunter node 400 controller, which is connected with 4 valves.

What i want to achieve is to have each valve open (with the other 3 closed) for a few hours.

13:00-14:00 valve 1 open - the others closed,
14:00-15:00 valve 2 open - the others closed,
15:00-16:00 valve 3 open - the others closed,
16:00-17:00 valve 4 open - the others closed

From what i see, i can't do that, cause there are only 3 programmes (A,B,C), so i can have only the three of the four valves open independently. (every valve is assigned to a programm)

Am i missing something?





Friday, April 18th 2014, 4:12am

thank you for the answer.
let's say i put in program A 4 start times.

13:00, 14:00, 15:00, 16:00

then when i adjust the run times, they are adjusted for the whole program, and not for every start time of the program.
eg. 1:00 for station 1 and 1:00 for station 2

this way i'll end up, with more than one valve open. (with the example above, i'll have 4 start times, with both station 1 and 2 open)

what i want is to have each station alone and seperately open from the others.


Supreme Member

Posts: 4,862

Location: Metro NYC


Friday, April 18th 2014, 8:09am

Start time A1 is set for 13:00

That's all you do for start times.

Each zone is set to run for one hour.

The zones will run in sequence.

Job done.




Friday, April 18th 2014, 9:46am

oohhh!! i didn't know that the stations run in sequential order in a program!!!

very nice :thumbsup:

one more question.

can i set in a program, zero run
time for a station, so it won't open? (eg, run time for station 1 - 5
minutes, for station 2 - 5 minutes, for station 3 - zero minutes, and
for station 4 - 5 minutes)


Supreme Member

Posts: 4,862

Location: Metro NYC


Saturday, April 19th 2014, 3:11pm

A run time set to zero is the equivalent of "off" - it's how stations are associated with different programs, in order for them to run on different schedules




Tuesday, April 22nd 2014, 4:08am

can i set program A for even days and program B for odd days?


Supreme Member

Posts: 4,862

Location: Metro NYC


Tuesday, April 22nd 2014, 11:04am

Sure, why not?


Senior Member

Posts: 18

Location: Austin Texas


Thursday, April 24th 2014, 7:49pm

You don't need to program a start time for each zone or program for what your trying to accomplish.

You need to clear programs B & C and stick to only A

All that needs to be programmed is :
-1 or first start time( this start time applies to all the zone, once it finishes one it will move to the next) ex.13:00
-Valve run time ex. 1:00 for zones 1,2,3,4
-Day in which to water. I'd stay away from odd/even and interval watering. I would just set it to water a set day(s).

Keep in mind these controller will only allow one valve to open at a time no matter what.

If you program multiple start times on all three programs the controller will stack the programs and run all the time.

Hope that help.


Licensed Irrigator
Austin, Texas




Wednesday, May 14th 2014, 11:03am

a few questions more:

1. if i set in program A start time 12:00 in tuesday and run time in station 1 1 hr, and
in program B start time 12:00 in tuesday and run time in station 2 1 hr,
then both stations 1 and 2 will be open at 12:00 for 1 hour or will there be a problem? (because you said that the controller allows one station at a time)

2. if i set interval 3 days, then which day will the irrigation start? do i set also set the watering day, from which the interval starts counting?
if i set the watering day in monday, with 3 days interval, will it open again in thursday or friday?





Monday, May 26th 2014, 2:49am


Rate this thread