I NEED help with my sprinkler heads

Active Member

Thursday, May 17th 2007, 11:05pm

hi everyone,

I have problem on 1 zone. It has 6 heads. I noticed a drop in pressure since last year from 2 of the farthest heads. They spray weakly, not like in the past . But this year, they dont pop up, just water coming out of the 2 heads. The other 4 heads spray normal. I dug up to check for leak but dont find any. Should I run a new line to these 2 heads on different zone? any suggestion? thanks

mike

Go to the top of the page
Quote

SprinklerGuy

Supreme Member

Posts: 358

2

Friday, May 18th 2007, 3:15am

I would start at the last logical head that works.....roots could pinch the line....the line could be broken and leaking deep.....could be many things....that would be the logical starting point...

Cut that pipe and turn the zone on ...verify good pressure at that point and then rerun pipe or dig up old pipe until you find the obstruction.

Sprinkler Solutions, Inc.
Arizona and Colorado
www.sprinklersolutions.net

Go to the top of the page
Quote

duanelsandoval

New Member

Posts: 2

Location: USA

3

Tuesday, June 26th 2007, 8:08am

I have 4 valve system. Everything works except one line with 4 Rainbird Maxi-Paw Sprinklers with 3/4 and 1/2" inlets. The valve is providing water thru 3/4" pipe direct to the sprinklers from about 55'. With all 4 sprinklers none will oscillate. With 2 heads shut off the sprinklers will only oscillate right and left intermittently. I am using the red nozzles. The sprinklers are level. I have been told maybe another valve with two sprinklers per line. I have 80 PSI into the valves (code limits). I only run line/valve at a time.