You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

boo

Active Member

1

Thursday, April 5th 2007, 9:40pm

Educate me on use of a flow control

Can someone please tell me what a flow control is for? I know it reduces water flow, but does it reduce pressure?

boo

Active Member

2

Monday, April 9th 2007, 7:28pm

The reason I ask is I am planning on using some sprays on a 7'X65' strip. I was told anything under 12' radius would mist badly. So I'm trying to find out if I can use 12' sprays and reduce radius with flow control on valve? I have 53 psi and plan on running 10-12gpm per zone.

HooKooDooKu

Supreme Member

3

Monday, April 9th 2007, 8:02pm

As I understand it, flow control is when a valve has a knob that you use to restrict the flow of water through the valve. It essentially works like turning your hose bibb way down. Same thing with your sinks. You turn the knob on just a little to get a little water, or on full to get as much water as possible. When a valve doesn't have flow control, it basically means it acts like a sink knob with two positions, off and on.

Tom

Supreme Member

4

Tuesday, April 10th 2007, 3:37am

Why don't you use 8' nozzles instead of the 12'?

Wet_Boots

Supreme Member

Posts: 3,876

Location: Metro NYC

5

Tuesday, April 10th 2007, 4:48am

Or use a double row of strip nozzles.

boo

Active Member

6

Tuesday, April 10th 2007, 10:31pm

Just thought that most strip heads are 4x15 pattern. Dont you have to have head to head coverage?

Bill Painter

Advanced Member

Posts: 59

Location: Phoenix Az USA

7

Wednesday, April 18th 2007, 5:34am

Flow controls work to restrict water flow as mentioned before. I find them very useful for two puposes: reglate pressure at the heads so they don't fog, and to restrict the flow thru valves giving backpressure so the cavity area above the diaphragm can build pressure and the valve can close properly. Drip valves, in particular, have a real problem getting enough back pressure to close, especially if there's a very small volume flowing through the zone to start with. There HAS TO BE a differential of pressure between upstream and downstream sides of the valve or it won't close.... period. By restricting the flow through the bibb/valve seat, that differential is acheived. (I'm generally talking PIN type valves here, of course.)
Bill
The Irrigation Specialist Mfg' Az.
Please check my website and you'll find what I do and the unique tools I make and market.
Real timesavers, especially the Suck-Tube and Krik-It.
http://www.tismaz.com

boo

Active Member

8

Sunday, April 22nd 2007, 8:42pm

Thanks for the info.[:D]

Rate this thread