You are not logged in.

  • Login
  • Register

42SA nozzle replacement

savtong

New Member

Posts: 4

1

Wednesday, May 31st 2006, 9:59am

42SA nozzle replacement

I just bought several 42SA RB rotors. They all came pre-configured with 3gpm spray nozzles. I need to change 4 corner rotors with 1.5 gpm. I already bought a rain-tree for the 42SA's.

Anybody knows how I can do this/replace the nozzles while not damaging the rotors?

Thanks [:)]
awin

brad44

Active Member

Posts: 10

2

Wednesday, May 31st 2006, 10:25am

Real easy. First make sure the radius reduction screw is completely clear of the nozzle. Next, lift and hold up the stem. With a flat head screw driver you should be able to easily remove the nozzle. I think there's a slot on the bottom of the nozzle.

savtong

New Member

Posts: 4

3

Wednesday, May 31st 2006, 4:34pm

I will try this once I got my rain-tree order from the mail.
My sprinkler is already up and running and I plan to change the nozzle without removing the rotors.

Thanks,[:D]
awin
Rate this thread