You are not logged in.

1

Thursday, August 23rd 2018, 9:03pm

Two line jet pump.

I have a two line jest pump with a pressure tank attached to the pump, one of the lines coming in is leaking form a 90 I want to replace the bend. I have no idea what’s going to happen when I crack that bend or what needs to be done once I replace the bend



Indexing valve is going too



Any advice would be very appreciated

Wet_Boots

Supreme Member

Posts: 5,277

Location: Metro NYC

2

Friday, August 24th 2018, 12:12pm

You have a "deep well" - the pump is a Convertible Jet Pump with the two lines going into the well, connecting to a deep well ejector assembly.

There is no reason to torture yourself over tight spaces near the pump. You can always re-plumb it starting from the outdoor piping.

3

Friday, August 24th 2018, 6:54pm

Thanks for the reply. The 90 on the left is leaking when I replace it will I need to do anything with the pump once I the repair is complet or can I just run the pump? Will I need to put air back in the tank?

This post has been edited 1 times, last edit by "Whichwaysup" (Aug 24th 2018, 7:01pm)


Similar threads

Rate this thread