You are not logged in.

ctbear

New Member

Posts: 2

Location: Los Angeles

1

Monday, June 4th 2018, 12:15am

Sprinkler Heads leaking underground

Looks like I have a couple of leaks under sprinkler heads as I've noticed pools of water when running. Upon digging up the sprinklers, I've discovered that two 90 degree elbows are used as "risers" that attach to the sprinkler heads. What's the proper solution?


One can not fully tighten these elbows and align it such that the sprinkler heads are standing straight up and not at an angle. ?(


Elbows used: https://www.homedepot.com/p/1-2-in-M-x-F-Swing-Joint-Elbow-10-Bag-38503T/100171746?MERCH=REC-_-PIPHorizontal2_rr-_-202257127-_-100171746-_-N


Pics: https://imgur.com/a/WZanGOH

RichMoney

Active Member

Posts: 36

Location: Washinton

2

Wednesday, June 6th 2018, 9:05pm

Those fittings are junk, you are better off going with barbed fittings and funny pipe. Also known as Flex Pipe found here and the barbed fittings found here .
Those pre-made, fittings are prone to leaks.
Let me know if you need any additional information.
Sprinklerresource.com

ctbear

New Member

Posts: 2

Location: Los Angeles

3

Thursday, June 7th 2018, 12:05am

Those fittings are junk, you are better off going with barbed fittings and funny pipe. Also known as Flex Pipe found here and the barbed fittings found here .
Those pre-made, fittings are prone to leaks.
Let me know if you need any additional information.
Sprinklerresource.com
Thanks, I guess that would be the most cost effective solution. I don't get why the original contractor used all these leaky fittings. Quite terrible and a waste of water.


Similar threads

Rate this thread