You are not logged in.

WayneB

New Member

1

Tuesday, July 25th 2017, 10:29pm

Station 3 will not run after replacing station 2 valve

I have a 7 zone station. Recently I had a problem with zone 2 not running. After replacing the solenoid and diaphragm I replaced the entire valve. A Rain bird CPF-100. After installing the new valve station 2 now operates successfully but now station 3 will not run. Stations 1, 2, 4-7 run fine. Station 3 ran correctly before I replaced the valve in station 2. When I try to run station 3 a few heads have water trickle out but that's all. I tried removing 3 heads and run to no prevail. Do I have air in the line or anything else? Thank you.

mrfixit

Moderator

Posts: 1,994

Location: USA

2

Tuesday, July 25th 2017, 11:59pm

Maybe you got some debris in the manifold while replacing valve 2. Take 3 apart and look for a clogged port.

WayneB

New Member

3

Wednesday, July 26th 2017, 9:07pm

Maybe you got some debris in the manifold while replacing valve 2. Take 3 apart and look for a clogged port.


Thank you. As soon as I can find valve 3 I will. Valves are randomly buried.

Rate this thread