You are not logged in.

6010fd12

New Member

1

Thursday, September 10th 2015, 12:26am

Front Lawn Sprinkler Design

Alright so I just sketched up myself a plan of where I will be placing my sprinklers in my front lawn and I wanted to ask if this was looking good.

I will be using MP800SR sprinklers at regulated 30 psi (to lower the range) for all my sprinklers that will be on that zone.
My static pressure is 50 psi and the GPM is about 6.
Will this zone work out?

Evergreen Sprinkler

Active Member

Posts: 29

Location: Boise, Idaho

2

Friday, September 11th 2015, 9:36am

You shouldn't need those full circles. If you plan to use the mp800sr heads I would just space them evenly every 10 feet. You should end up with 4 quarters and 4 halfs for a total gpm of 2.6.

6010fd12

New Member

3

Friday, September 11th 2015, 3:09pm

You shouldn't need those full circles. If you plan to use the mp800sr heads I would just space them evenly every 10 feet. You should end up with 4 quarters and 4 halfs for a total gpm of 2.6.
So something like this? These are all 10' except for the bottom right sprinkler that is 8' so I don't water the driveway.


Evergreen Sprinkler

Active Member

Posts: 29

Location: Boise, Idaho

4

Wednesday, September 16th 2015, 10:45am

You shouldn't need those full circles. If you plan to use the mp800sr heads I would just space them evenly every 10 feet. You should end up with 4 quarters and 4 halfs for a total gpm of 2.6.
So something like this? These are all 10' except for the bottom right sprinkler that is 8' so I don't water the driveway.

Yup. That looks good to me!

Rate this thread