You are not logged in.

ermeitzn

Starting Member

1

Sunday, July 26th 2015, 8:40am

System won't stop running

I have a Hunter SRC Plus controller. I am almost positive I have my programming correct. I set it up to run on even days for 15 minutes per zone at 6am. When the last zone completes, it automatically starts over with the first zone again. If I don't manually turn the dial to the OFF position, and then back to the program, the sprinklers will run continuously. Anyone have an idea why this is happening?

mrfixit

Moderator

Posts: 2,009

Location: USA

2

Sunday, July 26th 2015, 2:33pm

There's a good chance that you've programmed more than 1 start time. From what you've said it sounds like you've programmed each zone to start at 6 am which will cause the problem you've described.

You only need ONE start time at 6 am then the valves will run in sequence. Erase all the other start times and see what happens.

Central Irrigation

Supreme Member

Posts: 371

Location: Central Minnesota

3

Sunday, July 26th 2015, 7:09pm

Check programs B and C also.

Rate this thread