SPRINKLER TALK FORUM - You Got Questions, We've Got Answers

I have an older home in the country. 2.5 acres. The house is feed by city water, but very expensive to water with. I also have a 10" orchard valve system (with a unused 4" pipe teed off) for watering the back acreage, feed of a canal, gravity, and works great. I would like to install a pump system to tap the 4" line. Then use canal water to sprinkler the house and lawn. The lot is 166' x 1204' I not concerned with water being drinkable, but obviously must be filtered to be used in a drip system. I have put together a few house systems already. But off city water. I know i need a pump- storage device.. etc. Any words of wisdom ? Any plans or kits out there for this install. Thanks.. JIM

The canal is a 1/4 mile away. I have a 12" buried pipe. I laid the pipe 10 years ago, runs burried along the paved road in front of mine and other houses. I have then 10" risers with orchard valves running down the long edge of the property. On the edge of the lot the 166' front, is where the pipe is. and the 4" tee is there. I figure to just extend the 4" pipe to a pump station. Then feed the sprinkers system from there. The 4" is about 75' from the house.

My goal is to sprinler system for the house area only.. about 1 acre.. of various areas .. veg garden, rose garden, lawn ~~ 1/4 acre and bordering trees. and various small planters.. any ideas on the GPM and PSI ..Over kill is ok.. then ready fo growth if need be. Any brand of pumps or kits better than others.. thanks