You are not logged in.

1

Tuesday, August 5th 2014, 12:46am

Richdel 100 series

Hi sprinkler-heads, ( see what I did there?).

I've got some rich del 100 series popups that I want to replace as they're blocked and I twisted the cap off, leaving a cup type thing in the ground. It seems quite secure and I didn't want to force it in case something cracks.. Is it safe to do so?

I have some replacement pope units that worked on one spot where there was a different type of unit. coupled with a riser, but I'm concerned that these cup things are part of a T junction not just screw in like the other unit.

The cap part that I removed has a spring in it.

Gavin

Wet_Boots

Supreme Member

Posts: 4,077

Location: Metro NYC

2

Tuesday, August 5th 2014, 7:58am

Dig away all the dirt from around one of the heads, and you'll see how to proceed, and how the heads are fitted to the rest of the system.

3

Wednesday, August 6th 2014, 7:35pm

Thanks wet boot. I've since looked at some internet images of it and it clearly has a standard female screw bit at the bottom, so I'll apply some elbow grease and see how I go. let you know. cheers,

Rate this thread