You are not logged in.

Benmt

New Member

1

Thursday, July 24th 2014, 11:01pm

2 common wires

I'm replacing an old imperial controller that isn't keeping time accurately anymore. I purchased an orbit 6 zone controller, but ran into confusion before I removed the wiring from the Imperial. It has 2 wires attached to the Common terminal. 1 white wire is part of the group that includes the colored wires from each zone. The 2nd wire is a single larger gage wire. I don't know what it is connected to. Any ideas? Should I just connect both wires to the Common terminal of the new controller? Thanks

Wet_Boots

Supreme Member

Posts: 5,147

Location: Metro NYC

2

Friday, July 25th 2014, 9:17am

That will work. The old Imperial controller utilized a separate common wire for zones on the shrub schedule.

Benmt

New Member

3

Friday, July 25th 2014, 1:46pm

Thanks

Thanks

Similar threads

Rate this thread