You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

harmi

Unregistered

21

Tuesday, May 1st 2012, 11:06am

Slundi thanks, I will give last chance to correct value of mid capacitor (I put 470uF/35 instead of original 220uF/50V and measured there >70V and capacitor was hot). If this does not help, looking for new controller, this does not make sense. PH.

harmi

Unregistered

22

Monday, May 7th 2012, 2:46pm

The end

I gave up and today ordered different type/brand of controller.

Slundi

Unregistered

23

Wednesday, May 30th 2012, 1:19am

Flashing 24V

After changing all the 3 Electolyts and and the power resistor it started working fine first but after a while (~1h) the 24V problem came back. I contacted technical support and they suggested to replace the controller because this problem msot probable hit the processor.

The Zener voltage is 9.32V



I gave up with this product and will go for another, more reliable one.

Annie

Unregistered

24

Thursday, November 8th 2012, 4:39pm

Irritrol Junior Max, 6 stations

Absolutely hate it. No clear instructions. Yes, I know I can download a manual. I do not wish to deal with sprinkler company.

Can someone recommend a reliable, no brainier?
Thanks!

Wet_Boots

Supreme Member

Posts: 4,053

Location: Metro NYC

25

Thursday, November 8th 2012, 6:41pm

RE: Irritrol Junior Max, 6 stations

Absolutely hate it. No clear instructions. Yes, I know I can download a manual. I do not wish to deal with sprinkler company.

Can someone recommend a reliable, no brainier?
Thanks!
Consider a Hunter XC-600 - it looks a bit toy-like (they want you to spend more for a bigger controller :)) but it performs all the essential functions

marian

New Member

Posts: 3

Location: Slovakia

26

Monday, September 2nd 2013, 5:33pm

"Flashing 24V" problem - fixed!

Hi everybody.
I had the problem with blinking 24V indication too. The fix is quite easy - change all 3 electrolytic capacitors:
C8 - 470M/16V 85 °C -> 470M/16V 105 °C
C7 - 220M/50V 85 °C -> 220M/63V 105 °C
C9 - 100M/16V 85 °C -> 100M/16V 105 °C
All of them are undervalued from temperature point of view and one also from voltage point of view. I have already repaired lot of them (>30pcs) with 100% success. The affected models are mainly Irritrol Junior MAX * and sometimes also Toro DD *. Do not change resistors or zener diodes, it may cause another problems.
Marian

This post has been edited 1 times, last edit by "marian" (May 27th 2014, 4:37pm)


onkio

Unregistered

27

Wednesday, March 12th 2014, 2:49pm

RE: "Flashing 24V" problem - fixed!

Hi everybody.
I had the problem with blinking 24V indication too. The fix is quite easy - change all 3 electrolytic capacitors:
C8 - 470M/16V 85 °C -> 470M/16V 105 °C
C7 - 220M/50V 85 °C -> 220M/63V 105 °C
C9 - 100M/16V 85 °C -> 100M/16V 105 °C
All of them are undervalued from temperature point of view and one also from voltage point of view. I have already repaired lot of them (>30pcs) with 100% success. The affected models are mainly Irritrol Junior MAX * and sometimes also Toro DD *. Do not change resistors or zener diodes, it may caused another problems.
Marian


Thanks! Thanks! Thanks! Thanks! Thanks!

marian

New Member

Posts: 3

Location: Slovakia

28

Tuesday, May 27th 2014, 4:53pm

RE: "Flashing 24V" problem - fixed!

Additional hint for DIY:
- Be careful when removing old capacitors. The PCB is sensitive for overheating and you may easily break the conductivity of through-holes. It is recommended to let a small gap between capacitor and PCB and solder the capacitor also from PCB top side...
- Since the big resistor near the capacitors is quite hot during operation, bent the components a little bit apart...

Romeo

Unregistered

29

Tuesday, June 10th 2014, 3:57am

RE: "Flashing 24V" problem - fixed!

I am absolutely amazed! This is an 1$ repair (the cost of the capacitors) and works. My model is an Irritrol Junior Max, 8 zones + master valve, 2003 model, and I bought it in 2005, as I remember. This spring the controller failed to work with 24V error. Now is working again. Marian, thank you!

Hi everybody.
I had the problem with blinking 24V indication too. The fix is quite easy - change all 3 electrolytic capacitors:
C8 - 470M/16V 85 °C -> 470M/16V 105 °C
C7 - 220M/50V 85 °C -> 220M/63V 105 °C
C9 - 100M/16V 85 °C -> 100M/16V 105 °C
All of them are undervalued from temperature point of view and one also from voltage point of view. I have already repaired lot of them (>30pcs) with 100% success. The affected models are mainly Irritrol Junior MAX * and sometimes also Toro DD *. Do not change resistors or zener diodes, it may cause another problems.
Marian

Rate this thread