You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Wednesday, May 7th 2014, 3:55pm

Locating Valves with a back yard hill

I have recently redone a rising slope in my backyard with drought tolerant plants (I live in coastal S. Cal). However, I still need to water periodically during dry times. I also had my connection to the street modified, but now have 110 - 120 psi. I have old Champion 3/4" and 1" anti-siphon valves at the bottom of the hill, and the two 3/4" are now leaking heavily. I've replaced the gasket in the body, but that hasn't helped. I read that the anti-siphon feature is useless regardless because the valves are below the sprinklers. SO - do I need to reposition the valves at the top of the slope? Should I just replace the 3/4" valves with larger ones (assuming that water pressure is an issue)? And do I need to stay with Champion or can I go to different valves?

SmartEarthAustin

Senior Member

Posts: 19

Location: Austin Texas

2

Wednesday, May 7th 2014, 8:27pm

Anti siphon valve are required to be place 12" above the highest outlet.

Most Lilly the leaking you are seeing is due to back pressure due to the slope.


Personally I'm not a fan of anti siphon valves. I recommend using one standard double check valve or RPZ valve depending on the code for your area, then install standard valves- Hunter PGV. If you do this you will not have to move the valves all the way up hill. It looks a lot better and it's much more reliable.

I would also installing a pressure regulator before the Backflow device, this will prevent misting and premature wear and tear on the system.

Hope this helps.
http://www.smartearthsprinklers.com/

Cheers!

Gabriel
Licensed Irrigator
Austin, Texas

3

Thursday, May 8th 2014, 11:30am

Thank you. I'm checking with a local landscaper on the code.

hi.todd

Supreme Member

Posts: 412

Location: Houston, Texas

4

Sunday, May 18th 2014, 6:46pm

landscaper may not be the best choice for irrigation questions.

That is like asking your sprinkler guy about landscaping.

It is a separate knowledge base, but there are some very patient people that may have the skill set for both.
:thumbsup:
:thumbup: :thumbsup:

Similar threads

Rate this thread