You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Buster10

Unregistered

1

Monday, April 8th 2013, 10:01pm

Suggestions for 10' x 150' strip of grass

Our neighborhood entrance has one lane entering and one exiting that gives us a ten foot wide by 130 long strip of grass surrounded by asphalt. We installed hunter sprays every 12 feet and used 6 foot spray heads to keep from watering the street. Obvious mistake we have dry areas between the heads. I also notice the sprays do not give very even coverage.

Any suggestions in a spray head to purchase to give more even coverage of entire strip of grass? It is ok if we spray onto asphalt. Would MP rotators work better. They are expensive but if best choice we will purchase. Thanks.

Wet_Boots

Supreme Member

Posts: 3,878

Location: Metro NYC

2

Tuesday, April 9th 2013, 7:39am

Are you saying you installed a line of full-circle heads down the middle of the strip?

Buster10

Unregistered

3

Tuesday, April 9th 2013, 3:53pm

Yep, that is what I did.

Wet_Boots

Supreme Member

Posts: 3,878

Location: Metro NYC

4

Tuesday, April 9th 2013, 10:26pm

Down the center is no good. You use half-circle heads along the curb, on both edges of the strip.

Rate this thread