You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

jalexand

Unregistered

1

Saturday, October 13th 2012, 10:58am

How to Winterize a Sprinkler System with Wilkins 975XL

Hello,

I just purchased a new house with a irrigation system. I climbed under the house into the crawlspace and found a Wilkins 975XL back flow preventer. There appears to be a main shutoff valve, an input and output valve for the back flow preventer and then 4 test cocks. There is no t junction after the back flow preventer to connect an air source.
So here are my questions.

1. Is it ok to connect an air source to the #4 test cock to apply pressure to the lines and blow out the heads. If so can you by an adapter to connect to an air compressor or do you have to make up something.

2. What is the best way to drain or empty the back flow preventer. I'm thinking that it might not be necessary since it's in the crawl space and the main water line to the house is not insulated nor are any of the other water lines. I'm in Richmond Virginia.

Thanks,
Jason

Wet_Boots

Supreme Member

Posts: 4,064

Location: Metro NYC

2

Saturday, October 13th 2012, 11:23am

You might want to purchase a wireless thermometer with an extra sensor or two. Put one of the sensors in the crawl space.

Rate this thread