You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

SYD

Starting Member

Posts: 1

Location: Elk Grove, CA

1

Wednesday, September 19th 2012, 3:20pm

Fix to gradual loss of pressure

Hi, this is my first post. I've got a large system, 18 stations, drip works fine, but sprinkler pressure is lost after 1 or 2 cycles. I can easily fix the issue by turning off the water coming from the well and releasing the pressure using the ball valve underneath the inlet strainer. I thought this might be a pressure vacuum breaker issue but I just rebuilt it and it should be OK. So now I think it has something to do with the inlet strainer. I have a metal filter sitting in a plastic housing with the 3/4" ball valve at the bottom to release water if I need to. The strainer seems to be clean so it's hard to believe it could be a clogged strainer. Any ideas?

Wet_Boots

Supreme Member

Posts: 4,021

Location: Metro NYC

2

Wednesday, September 19th 2012, 8:16pm

Either the strainer is clogging and you don't see it, or the water level in the well is dropping as the system runs. With a pump set deep below the (at-rest) water level, there can be a significant decrease in pressure as the water level drops in the well shaft.

Similar threads

Rate this thread