You are not logged in.

  • Login
  • Register

beachdoc

Starting Member

1

Saturday, May 19th 2012, 1:37pm

Toro Lawn Master II timer

Toro Lawn Master II




Hello

I am installing a new Toro Lawn Master II Landscape Timer to replace an
Intermatic Timer on a six zone sprinkler system with one valve switch
for all six zones. I am unclear from the directions how to wire the
switch from the control box to the switch. Can there be just the Com and
MV connections to the switch or do I have to wire the switch using all
six of the S1-thru S6 terminals? If so do I just splice S1-S6 wires
together and run one wire back to the switch with the common?

Thanks for any clarity.

Beachdoc

Wet_Boots

Supreme Member

Posts: 3,595

Location: Metro NYC

2

Saturday, May 19th 2012, 5:37pm

As I gaze into the crystal ball, it appears to me you are in Florida 8o

Wet_Boots

Supreme Member

Posts: 3,595

Location: Metro NYC

3

Monday, May 21st 2012, 7:36am

Predicting you are in Florida is not a gag. You have described what is almost certainly a sprinkler system with an indexing valve, and those systems use a different sort of controller, a controller with a delay between zones activating, in order to work with the indexing valve. Your Toro controller is not likely to have enough of a delay to work with the indexer. If you had a more expensive controller, you could get a delay between zones, but you would be spending more than a new indexing-valve controller would cost.

This post has been edited 1 times, last edit by "Wet_Boots" (May 21st 2012, 9:14am)


4

Monday, May 21st 2012, 9:06am

wet-boots,
Thanks.
I wasn't translating "with one valve switch for all six zones." into index valve.
Now it makes sense.

help me please!

Unregistered

5

Tuesday, June 26th 2012, 1:11pm

Doesnt work

So i need help with my sprinkler system i have it all step up but the 3rd zone doesn't want to work and i have put new wire and rewired the whole thing and still cant find the problem!! Please help me!!

Rate this thread