You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

jimp160

New Member

Posts: 2

Location: Michigan

1

Monday, June 18th 2012, 10:56am

Main line poly pipe repair

I have a leak where my main line (black poly pipe) is attached to a one inch grey elbow (part of the manifold) in the valve box. My question is; can I get the black poly pipe off of the barb fitting of the elbow or will I have to cut the poly pipe.

2

Monday, June 18th 2012, 11:41am

I just had to do this about 10 minutes ago.
I'm under ideal conditions: office, all tools, workbench, etc.
Short story: I ended up cutting the poly pipe.

I don't have a heat gun and that might have made the difference.

wsommariva

Supreme Member

Posts: 327

Location: Northern New Jersey

3

Tuesday, June 19th 2012, 10:19am

Propane torch to heat it up. Not too much or you will damage the poly

jimp160

New Member

Posts: 2

Location: Michigan

4

Tuesday, June 19th 2012, 12:13pm

I used a heat gun and the elbow came out of the poly pipe. I found a split in the elbow (not sure why after four years) and replaced it. So far, so good. Thanks for your responses.

Similar threads

Rate this thread