You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

ris

New Member

1

Wednesday, May 30th 2012, 10:57pm

broken pipe

I have a broken pipe somewhere out front. Moved into a house last summer, just getting around to getting the sprinkler system running. one zone in the front has very low pressure. I've capped the heads I've found, and left the zone 'on'. No water is coming to the surface, but I do see some going down through the drain at the curb. I'm guessing the water has found a path to the drain pipe and not coming to the surface. that zone has four sprinkler heads around the side of the lawn near the walkways. The other zone that covers the front yard has at least 1 sprinkler in the middle of the yard. Assuming they placed the sprinkler heads in the same fashion, there's at least one in the center of the yard that I haven't found yet. Any trick to figuring out the path for the underground pipe?

mrfixit

Moderator

Posts: 1,420

Location: USA

2

Thursday, May 31st 2012, 12:38am

I ran across this scenario once. They had a leak in the mainline but the only water to be seen was draining into the catch basin.
What was happening is, the water was going into the drain pipe which was buried in gravel through the corrigation in the pipe. I found the leak by pressing my ear to the cement like an Indian.
I doubt you can do that in your case though.
Are you sure the valve is coming on all the way? Try opening the bleeder screw...

ris

New Member

3

Thursday, May 31st 2012, 12:53am

It's an old system with Nelson (now Signature) valves. No bleed screw. I used a long screwdriver with the tip to the valve and handle to the ear to track down valves stuck open (old trick from troubleshooting tube-type radios). Got the diaphragms changed on a couple of valves. I can hear the water source going pretty good with the 4 heads in the zone capped. Given the water that is making it through the drain, I'm pretty sure it's a leak in a pipe. I may have to just use a shovel and open up the sod near some of the heads.
If I just rely on the auto sprinklers, maybe the grass will start to brown where the leak isn't...

Wet_Boots

Supreme Member

Posts: 3,878

Location: Metro NYC

4

Thursday, May 31st 2012, 9:11am

Sometimes, you need to cap off the heads in the leaky zone, to get enough water flowing to show itself at the point of the leak.

ris

New Member

5

Thursday, May 31st 2012, 9:37am

Yep, done that. I think the water leak is close to the drain pipe that flows to the street. I was going to try checking in a line from the drain at the street straight to the house where the gutter downspout is. Might be along that line. A couple of the heads are right on that line also.

Sometimes, you need to cap off the heads in the leaky zone, to get enough water flowing to show itself at the point of the leak.

ris

New Member

6

Thursday, May 31st 2012, 10:12pm

found it. The sprinkler at the corner of front walk and driveway was connected to a T. one end of the T went under the walk to a very small chunk of dirt under the bay window. The pipe was broken on the house side of the walk under the walk. capped the T heading under the sidewalk, no leak. Whew. I was worried they laid the pipe and then put the walkway over it.

Rate this thread