You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

dave

Starting Member

11

Sunday, April 22nd 2012, 6:05pm

Pushing 1/4 " black poly over barbed fitting

I can not push the barbed connector into the 1/4" Poly tube. Is there a trick to this? I noted someplace, about using a hairdryer, also a service guy told me a soap solution would help get a 1/2" compression fitting on a 1/2" line. Help.

wsommariva

Supreme Member

Posts: 327

Location: Northern New Jersey

12

Monday, April 23rd 2012, 8:13am

I've also heard to use some plumbers dope. I used a propane torch. Just 3 or 4 seconds. Too much and you can deform the PE which will cause a leak.

Rate this thread