You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

oldcarman

Starting Member

1

Sunday, April 15th 2012, 9:02pm

24 Zone controller Reading " FUSE" ??

My controller (Irrotrol) is not working at present. It just flashes "FUSE" As I did not find a fuse under the inspection panel, what Fuse would I replace, repair or ????

This post has been edited 1 times, last edit by "oldcarman" (Apr 15th 2012, 10:01pm)


Wet_Boots

Supreme Member

Posts: 4,082

Location: Metro NYC

2

Monday, April 16th 2012, 4:26am

Look for a bad (short-circuited) solenoid

3

Monday, April 16th 2012, 8:20am

Can you give us a make/model of the controller?

mrfixit

Moderator

Posts: 1,462

Location: USA

4

Monday, April 16th 2012, 4:00pm

You may not have a fuse. It's just a warning. If you do have a fuse then you'll need to replace it.
Reset the controller. Just unplug it. Take out the back up battery. Run the stations until you see which numbered station causes the "fuse" warning.
Find that valve and disconnect one of the wires from the solenoid. Now run the controller again. If there's no warning change the solenoid as Boots suggested. If not it's a wiring issue.

Rate this thread