You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

daltex

Starting Member

1

Friday, April 6th 2012, 6:57pm

Imperial, Valet timer problem

I have a 6 station Imperial Valet timer that periodically hangs up at station 4. I manually recycle the timer to station 4 and then it turns on. What is causing this problem. Thanks for your help.
Daltex

Wet_Boots

Supreme Member

Posts: 4,054

Location: Metro NYC

2

Friday, April 6th 2012, 11:17pm

dirty/worn/corroded wafer switch contacts

mrfixit

Moderator

Posts: 1,461

Location: USA

3

Saturday, April 7th 2012, 4:01am

Open it up and look at the number 4 dial from the inside. See if it's bent or loose.

Wet_Boots

Supreme Member

Posts: 4,054

Location: Metro NYC

4

Saturday, April 7th 2012, 9:41am

The workaround is to assign the current zone four to another currently unused zone.

Also, for the sake of building the knowledge base, time this hang-up period for a few controller cycles.

Rate this thread