You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Lsudad

Starting Member

1

Sunday, April 1st 2012, 10:25pm

Rain bird anti siphon leaks water after valve turned off

I'm at a loss. I have four anti siphon valves and three of the four work. The fourth I have replaced every part including replacing the entire valve unit. After turning off the valve water gushes out from the cap. It slows but continually leaks. When I take the cap off and siphon some water out, the water levels continues to rise. As stated I have replaced the diaphragm, the solenoid and the washer and cap. What else could it be? Thanks.

Mitchgo

Supreme Member

Posts: 499

Location: Seattle

2

Monday, April 2nd 2012, 12:13am

replace the whole valve.

Take the valve out and flush the line for 5-10 minutes

Wet_Boots

Supreme Member

Posts: 4,064

Location: Metro NYC

3

Monday, April 2nd 2012, 9:00am

I wonder if the zone runs uphill from the valve - wouldn't be the first time

4

Monday, April 2nd 2012, 9:36am

Elevation on these things is critical.
Higher than all your spray heads?

Rate this thread