You are not logged in.

rocky

New Member

11

Thursday, March 1st 2012, 3:59pm

Yep, had the check book in hand when the "guy" with 25 years experience in irrigation told me he was stumped and would need to dig up the entire system to see where they were connected. Guess he did not believe me when I told him I have not dug up anything.

Thanks for the suggestions. I will replace the valves to see if this corrects the problem. They are pretty old anyway.

Wet_Boots

Supreme Member

Posts: 5,165

Location: Metro NYC

12

Thursday, March 1st 2012, 4:20pm

"Watermaster" is a scary name - sight unseen, it promises all manner of crummy design and installation

Mitchgo

Supreme Member

Posts: 491

Location: Seattle

13

Friday, March 2nd 2012, 10:00am

I'm all for replacing the valves

I feel since Zone 2 is the root of all problems here .. Then there must be something more indepth. I would close the flow controls down on the other valves- turn on 2 and turn off/ cap all the heads . Checking the meter would indicate if you have a underground break not surfacing.

rocky

New Member

14

Friday, March 2nd 2012, 11:43am

Thanks, will try that this weekend. Worse case, I will replace all the valves with better ones.

Rate this thread